Inserting The Battery - Meec tools 021614 Bedienungsanleitung/Übersetzung Der Originalanleitung

EN
Charging status
The following status lights are shown to indicate the battery
status when the battery is put in the charger.
Red status
light
If the status lights on the charger do not go on:
– Check that the mains adapter for the charger is
correctly plugged into the power point and that the
charger is switched on.
– Check that the battery is correctly connected to the charger.

INSERTING THE BATTERY

Connect the battery to the battery connection on the power tool
and check that it clicks in place.
38
Green status
light
Charging status
Charger connected to mains.
The connected battery is
charging.
The connected battery is fully
charged.
Charging fault on the connected
battery.
Unsuitable charging
temperature (< 0°C or > 40°C).