Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• MOUNTING THE WALL BRACKET (E)
o
Choose a sheltered spot on a wall near an electric plug socket. Mark out where the
holes are going to go, drill the holes and attach the wall mount with the screws sup-
plied. The two nozzles can fit on the wall mounting, too.
• BEFORE STARTING THE VACUUM CLEANER
o
The battery cells in new appliances are not charged yet. That is why you must charge
up the vacuum cleaner for about 6 hours before its first use. After which, the appli-
ance will have reached its full capacity.
o
To make sure that the vacuum cleaner is ready for use at all times, you can charge it
again immediately after using it.
▪
Caution: To avoid reducing the operating time of the appliance, we recommend
that you discharge the appliance completely from time to time, after which the
battery must be charged again for 6 hours.
• CHARGING THE APPLIANCE
o
Put the vacuum cleaner in the charging station (E). This automatically connects it to
the power supply.
o
Connect the charger plug to a 230 V socket. When the red charging light (C) lights up,
it means that the appliance is being charged.
o
Whilst it is charging, the charger plug may become warm, this is completely normal.
It is not possible to overcharge the battery.
• DRY VACUUMING
o
Turn the appliance on (D) and clean the surface or object. To remove dust from crev-
ices, skirting boards, corners, drawers, etc., you can use the rigid crevice tool.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
23
Werbung
Inhaltsverzeichnis
