Balluff BAE PD-ML-010-04 Bedienungsanleitung Seite 71

BAE PD-ML-010-04
Configuration Tool + USB-Adapter
8
Specific functions of BML BM1/BM2 (continued)
Calibration errors
Fig. 8-9: Calibration error
The errors in Tab. 8-4 can occur during calibration:
Error description
Speed too low or no movement detected.
Speed too high.
Communication error. Check the connection
and restart the Calibration Wizard.
Insufficient working memory. Try closing some
programs and restarting the Calibration Wizard.
Unknown error. Restart the Calibration Wizard.
Tab. 8-4: Calibration error BML BM1
www.balluff.com
Troubleshooting
The speed does not agree with the set speed range.
► Check the speed range and if necessary adjust it in the settings.
► Check the connection on the sensor module and USB adapter and
restart the Calibration Wizard.
► Close as many programs as possible and restart the Calibration
Wizard.
► Check the connection on the sensor module and USB adapter and
restart the Calibration Wizard.
english 33