Balluff BAE PD-ML-010-04 Bedienungsanleitung Seite 67

BAE PD-ML-010-04
Configuration Tool + USB-Adapter
8
Specific functions of BML BM1/BM2 (continued)
Settings
Fig. 8-3: Set calibration range and speed
Depending on the selected application type, different
settings are available before calibration (see Tab. 8-2).
Application Settings
type
Rotative (axial) Calibrating range
Rotation speed
Measuring time [s]
Rotative (radial) / Measuring time [s]
linear
Tab. 8-2: Settings of BML BM1/BM2
The application types Rotative (axial) or Rotative
(radial) / linear can be changed in the system
parameters (see chapter 8.1.1 on page 26).
The recommended rotational speed for
optimized calibration is between 100 and
300 rpm.
By clicking the n button, the next step C
eXt
appears.
www.balluff.com
Fig. 8-4:
Options
Full (360°)
By segment (less than 360°)
Multiple selection options
5...30
5...30
aLiBratiOn
Set measuring time
Note
Entire measuring range (360°) is calibrated.
Measuring range less than 360° is calibrated.
Specifies the speed range with which the
calibration is performed.
Specifies the time frame in seconds that is
sufficient to move from the start position to the
end position during segment calibration.
Specifies the time frame in seconds that is
sufficient to move from the start position to the
end position during linear calibration.
english 29