Grundig VCW 7230 Bedienungsanleitung Seite 32

4 Operation
4.4 Cleaning of Dirty Tank
Step 1:
Press to take out the dirt tank.
Step 2:
Take out the cap of the dirt tank.
4.4 Indication Guide
Low Level Indicator Light
Brush Roller Indicator Light
Clean Water Tank Indicator Light
Level Indicator Light:
The light will be kept-on in white
when the high / low level function
is on.
Roller Brush Indicator Light:
When the rolling brush is blocked,
the red light flashing for 3 times
will be steady on; Notice Please
clean the roller brush in time
after blocking, ant it can be used
normally after cleaning.
32 / EN
Please pour out the wet waste and
rinse the tank.
Power Indicator Light:
The light will be kept-on in blue
when the power cord is plugged.
Self-cleaning Indicator Light:
After cleaning, put the machine
back to the storage stationand
switch on the power, the indicator
light flashes white, indicating the
use of self-cleaning function.
Wet&Dry Upright Vacuum Cleaner / User Manual
Step 3:
Slide to open the cover that is
located on the cap and pour out the
dry waste.
Power Indicator Light
High Level Indicator Light
Self-cleaning Indicator Light
Dirty Water Tank Indicator Light
Dirty Tank Indicator Light:
When the dirty water tank is full, the
alarm red flashes for 3 times and
then it is steady on.
Clean Water Tank Indicator Light:
When the clean water tank is short
of water. The alarm red light flashes
for 3 times and then it is steady on.