3 Installation
3.3 Installation of Brush Tool
Removal:
Unlock the roller brush by pressing
the button to the left and pulling out
the roller brush upward.
C
When using the brush on the carpet floor, it is recommended to turn off the water spray function.
3.4 Installation of Brush Roll Cover
Removal:
Press the release button on the
upper cover of the floor brush with
your finger, and pull up to remove
the upper cover of the floor brush.
Wet&Dry Upright Vacuum Cleaner / User Manual
Installation:
Set the roller brush on the right
wheel axle and pressthe roller
brush downward. The roller brush
unlocking button is equipped with
a snap for positioning, and the
assembly is completed when the
"click" sound is heard.
Installation:
Align the buckle at the bottom of
the upper cover of the ground brush
with the card slot, press the cover
tightly, and complete the assembly
when a "click" is heard.
29 / EN