Grundig VCW 7230 Bedienungsanleitung Seite 31

4 Operation
4.2 Self Cleaning
Place the appliance on the station,
plug in and press the self-cleaning
switch for a while, the machine will
start the self cleaning. After self-
cleaning is finished, please empty
the dirty water tank and unplug the
power cord.
C
After self-cleaning, it is recommended to dry the brush roller in a ventilated place, so as not to affect
the cleaning effect for the next use.
4.3 Self-Cleaning Mode Working Method:
1. After cleaning is done, turn off the device and put it on its storage station
2. Self-Cleaning button flashes on automatically.
3. Press the self-clean button (white light on and no blink) and process will start.
4. Self-cleaning process will be finished, and red light will be blinking.
5. Clean the dirty water tank.
6. After cleaning the dirty water tank, the red light goes off.
7. The blue light ring will be on.
C
If self-cleaning process would like to be repeated, please take the device, and put it on its storage
station again. The above steps must be done accordingly.
C
If the device unplugged after self-cleaning process, the self-clean light and red blink light will off. Self-
clean function can not be used if unplug/plug the product or take the product from storage station and
put it on its station again.
C
When it is re-plugged in next days, if the product is on its storage station, the self-clean light will be
blinking, and the process can start with above steps.
C
When it is re-plugged in the next day and the product is on the storage station, the self-clean light will
be blinking. The product does not have to be cleaned again. It can be used regulary again if it is taken
out of the storade station.
Wet&Dry Upright Vacuum Cleaner / User Manual
C
The fresh water tank needs enough water for the self clean-
ing.
31 / EN