2. Once the IMILAB C21is turned on, please do not attempt to rotate its head by force. If
the camera position is incorrect, adjustments can be made through the app.
Indicator Light
Steady blue on: connected/device status is normal
Flashing blue: network error
Flashing orange rapidly: waiting for connection
Flashing orange slowly: system upgrade in progress
Installing a MicroSD Card
Make sure that the power to IMILAB C21 is already disconnected. Adjust the camera lens
upward until the MicroSD slot is revealed, then insert the MicroSD card into the slot (the
side with contact points must be facing down).
Note:
Please turn off the IMILAB C21's power supply before inserting or removing the MicroSD
card. Please use a genuine Micro SD card manufactured by a qualified supplier, with a
reading/writing speed of no less than U1/Class 10. (Maximum support capacity is 64 GB)
8