Stanley STHT77616 Bedienungsanleitung Seite 10

WARNING:
GB
The following labels are placed on the laser tool
to inform you of the laser class for your
convenience and safety.
WARNING: To reduce the risk of
injury, user must read instruction
manual.
WARNING: LASER RADIATION. DO
NOT STARE INTO BEAM. Class 2
Laser Product.
TYPE 1: 3VDC
The label on your laser tool may include the following
symbols.
Symbol Meaning
V Volts
mW Milliwatts
Laser Warning
nm Wavelength in nanometers
2 Class 2 Laser
WARNING
Laser Radiation Exposure. Do not disassemble
or modify the laser tool. There are no user
serviceable parts inside. Serious eye injury could
result.
• If the equipment is used in a manner not specified
by the manufacturer, the protection provided by the
equipment may be impaired.
10
STHT77616
Made in China
www.STANLEYTOOLS.eu
• Do not operate the laser in explosive atmospheres,
such as in the presence of flammable liquids, gases,
or dust. This tool may create sparks which may ignite
the dust or fumes.
• Store an idle laser out of reach of children and other
untrained persons. Lasers are dangerous in the
hands of untrained users.
• Tool service MUST be performed by qualified repair
personnel. Service or maintenance performed
by unqualified personnel may result in injury. To
locate your nearest Stanley service center go to
www.2helpU.com.
• Do not use optical tools such as a telescope or
transit to view the laser beam. Serious eye injury
could result.
• Do not place the laser in a position which may cause
anyone to intentionally or unintentionally stare into
the laser beam. Serious eye injury could result.
• Do not position the laser near a reflective
surface which may reflect the laser beam toward
anyone's eyes. Serious eye injury could result.
• Turn the laser off when it is not in use. Leaving the
laser on increases the risk of staring into the laser
beam.
• Do not modify the laser in any way. Modifying the tool
may result in hazardous laser radiation exposure.
• Do not operate the laser around children or allow
children to operate the laser. Serious eye injury may
result.
• Do not remove or deface warning labels. If labels
are removed, the user or others may inadvertently
expose themselves to radiation.
• Position the laser securely on a level surface. If the
laser falls, damage to the laser or serious injury
could result.