Safety Instructions: Installation - Veripart VPVR186NFE Benutzerinformation

• Never pull the power cable to disconnect the plug from the socket. Always hold the plug
firmly and pull it straight out of the socket.

1.2 SAFETY INSTRUCTIONS: INSTALLATION

!
DANGER!
Risk of fire / flammable materials.
CAUTION!
• The appliance is heavy. Take care when handling and wear protective gloves and closed
footwear.
• It is dangerous for persons other than authorised service technicians to carry out
maintenance on electrical components (plug, power cable, compressor, etc.) or to carry
out repairs with the cover plates removed. To avoid the risk of electric shocks, do not
attempt to repair this appliance yourself.
• If you detect any damage to the appliance or the power cable, do not connect the appliance
but contact the service department (see contact details on page 40).
• The power cable must be attached behind the appliance and must not be exposed or loose.
• Make sure that the power cable of the installed appliance is always easily accessible.
• This appliance requires a standard 220-240V 50Hz socket with 2-pole earthing. The
power cable of this appliance is equipped with a 2-pole plug suitable for standard wall
sockets with earthing to minimise the risk of electric shocks.
• On first installation (or after turning the door) wait at least four hours before connecting the
appliance to the power. This allows the oil to flow back into the compressor.
• Ensure that air can circulate around the appliance.
• Pull the plug out of the socket before carrying out any actions on the appliance (e.g. turning
the door).
• Incorrect use of the earthed plug may cause an electric shock.
• This appliance is not intended for use as a built-in freezer.
• The correct operation of the appliance can only be guaranteed if the specified temperature
range is respected. If, as a result of another installation, the correct ventilation requirements
are not met, the appliance
• will function correctly, but energy consumption may increase slightly.
• This appliance is not suitable for use with an inverter.
• Do not install the appliance near radiators, stoves, ovens or hobs.
• Do not install the appliance in direct sunlight.
• Do not install this appliance in spaces that are too damp or too cold.
• Do not expose the appliance to rain.
• The total volume of the space in which the appliance is installed divided by the amount
of freezerrant of the appliance must not be less than 8 g/m³. The amount of freezerrant
contained in the appliance can be found on the type plate.
• The LED lamp supplied with this unit is for use only in this device and not intended for other
applications and contains energy efficiency class G.
• The appliance may not operate optimally if it is in a place where the ambient temperature is
below the minimum or above the maximum of the temperature range for which the appliance
is designed for a longer period of time. Please refer to the "Climate Range" table below.
37