Safety Instructions: Installation - Veripart VPTMVR852 Benutzerinformation

• Food storage times recommended by the food manufacturer must be observed.
• Never pull the power cable to disconnect the plug from the socket.
• Always hold the plug firmly and pull it straight out of the socket.

1.2 SAFETY INSTRUCTIONS: INSTALLATION

!
DANGER!
Risk of fire / flammable materials.
CAUTION!
• The appliance is heavy. Take care when handling and wear protective gloves and closed
footwear.
• It is dangerous for persons other than authorised service technicians to carry out maintenance
on electrical components (plug, power cable, compressor, etc.) or to carry out repairs with the
cover plates removed.
• To avoid the risk of electric shocks, do not attempt to repair this appliance yourself.
• If you detect any damage to the appliance or the power cable, do not connect the appliance
but contact our customer service (see contact details on page 34).
• The power cable must be attached behind the appliance and must not be exposed or loose.
• Make sure that the power cable of the installed appliance is always easily accessible.
• This appliance requires a standard 220-240V 50Hz socket with 2-pole earthing.
• The power cable of this appliance is equipped with a 2-pole plug suitable for standard wall
sockets with earthing to minimise the risk of electric shocks.
• On first installation (or after turning the door) wait at least four hours before plugging in the
appliance.
• This allows the oil to flow back into the compressor.
• Ensure that air can circulate around the appliance.
• Pull the plug out of the socket before carrying out any actions on the appliance (e.g. turning
the door).
• Incorrect use of the earthed plug may cause an electric shock.
• This appliance is not intended for use as a built-in appliance.
• The correct operation of the appliance can only be guaranteed if the specified temperature
range is respected.
• If, as a result of another installation, the correct ventilation requirements are not met, the
appliance will function correctly, but energy consumption may increase slightly.
• This appliance is not suitable for use with an inverter.
• Do not install the appliance near radiators, stoves, ovens or hobs.
• Do not install the appliance in direct sunlight.
• Do not install this appliance in spaces that are too damp or too cold.
• The total volume of the space in which the appliance is installed divided by the amount of
refrigerant of the appliance must not be less than 8 g/m3.
• The amount of refrigerant contained in the appliance can be found on the type plate.
• The appliance may not operate optimally if it is in a place where the ambient temperature is
below the minimum or above the maximum of the temperature range for which the appliance
is designed for a longer period of time.
• Please refer to the "Climate Range" table below.
31