Odys 5200 Benutzerhandbuch Seite 53

1 Repeat operating steps 1 and 2, as the procedure for setting the
PC camera operating mode requires.
2
Press ▲ or ▼ to select Mass
Storage and press OK to confirm.
3
Connect the digital camera to your PC using the USB cable. The
PC recognizes a new hardware device and automatically installs
the corresponding driver.
4
The camera is identified by
the computer as a mass
storage device. Open
Windows Explorer or My
Computer to access the
contents of the camera
memory. You can copy,
move and delete image
and video files.
Note
Disable the digital camera from the operating system correctly
using the "Remove Hardware Safely" option
camera or memory can be damaged. Ensure that no files are
being transferred between the PocketCam and the computer.
Removing the hardware from the PC (Windows Me/2000/XP)
Click the task bar on the right-hand side below the
select the "Remove USB Mass Storage Device – Drive (X:)" in the
following dialog window. Then the message now appears that the
hardware can be removed. Now remove the USB-cable from the
PocketCam.
22
; otherwise the
symbol and