Transferring Files Between Camera And Pc - Odys 5200 Benutzerhandbuch

2 Press the menu button and press ◄
or ► to select the symbol
(system settings). Press ▲ or ▼ to
select Online Mode and press OK to
confirm.
3
Press ▲ or ▼ to select PC Camera
and press OK to confirm.
4 Connect the digital camera to
your PC by inserting the end of
the supplied USB cable into the
USB port of your PC and
connecting the other end of the
USB cable to the USB terminal
of your camera. The PC
recognizes a new hardware
device and automatically installs
the corresponding driver.
To use the PocketCam 5200 as a PC camera, the driver installation
mentioned further above is required for every operating system.
Win2000 and Win XP do not require additional mass storage
drivers.

4.12 Transferring files between camera and PC

The camera must be set to Mass storage mode to transfer files between
the camera and your PC. In doing so, the camera behaves as a disk
drive.
21