English - IPC Wet & Dry OPTIM Übersetzung Der Originalanleitung

COMPONENT DESCRIPTION (PAGE 12)
A - Motor head
C - Tank hooking lever
D - Float valve kit: prevents the aspirated liquid from invading the motor head. To be
inserted into the detachable tank and use only for wet pick up (not for dry pick
up).
E - Hooks
F - Tank
F1 - Detachable tank
H - Inlet
I - Castor wheels
K1 - Prefilter
K - Main polyester filter.
J - Conveyor cone: to be inserted into the detachable tank and use only for dry pick
up (not for wet pick up).
L - Filter bag to apply on top of deflector. This filter does not exclude the use of
polyester filter, that still has to be used.
Y - Trolley
Z - Manual filter shaker (optional)
DRY PICK UP (PAGE 13)
Lift the lever (a) and extract the tank -F1- (b) (Fig.1);
Insert conveyor cone -J- .
If your vacuum is equipped with paper bag, slide paper bag over the deflector (Fig. 2).
Re-assemble the tank -F1-;
Push hose into hose inlet;
Attach wand and desired tool to hose ends;
Plug power cord into a properly grounded outlet and turn cleaner on.
WET PICK UP (PAGE 13)
Lift the lever (a) and extract the tank -F1- (b) (Fig.1);
Remove conveyor cone -J- and insert the float valve kit -D- (Fig. 3);
If your vacuum is equipped with paper bag, remove it from the deflector;
Re-assemble the tank -F1-;
Push hose into hose inlet;
Attach wand and hoses to hose end;
Attach squegee brush to the other end;
Plug power cord into a properly grounded outlet and turn cleaner on.
N.B. Pictures reported are merely indicative.

ENGLISH

5