Personnel Requirements; Special Safety Instructions - DENIOS. MT 240 Betriebsanleitung

Safety instructions
2.3

Personnel requirements

Risk-free working is only guaranteed, when only specially qualified workers use, maintain or repair the product.
Persons undergoing training may only be permitted to work with the product, if a qualified person is constantly
supervising the work. The following points must be strictly observed:
Observe the regulations for occupational safety and accident prevention

Always use the product in accordance with the intended use

Follow the manufacturer's operating instructions

Follow the operator's instructions

Report any damage or faults to a supervisor and have them repaired immediately

Only carry out work which has been specifically instructed

Never exceed the set responsibilities

2.4

Special safety instructions

Observe the following points when operating the equipment or when you are near the equipment:
Wear safety shoes! When picking up the tipping device using the forklift, there is a risk of injury to legs

and feet if the device tips over!
The wheelie bin tipper must be secured to the forklift by the safety chain, otherwise there is a risk to third

parties if the tipper slips!
Ensure nobody is in the danger area when tipping is carried out. There is a risk of crushing between the

tipper and fixed parts. There is also a risk that bulk goods may fall out of the tipping area under
unforeseen circumstances.
16 / 44 Wheelie bin tipper 002_INT 03