Product Overview; Intended Use - Hilti VC 20-U-Y Bedienungsanleitung

▶ Avoid contact with alkaline or acidic liquids. If contact accidentally occurs, rinse with water. In the event
of the liquid coming into contact with the eyes, rinse the eyes with plenty of water and consult a doctor.
VC 20-UM-Y
VC 40-UM-Y
▶ A Dust Class M appliance is suitable for picking up dry, non-flammable dusts, liquids, wood chips
and hazardous dusts with an exposure limit value of ≧ 0.1 mg/m³. The appliance must be equipped
with a suitable filter corresponding to the hazard classification of the dusts to be picked up.
2.7 Use and care of battery-powered tools
▶ Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
▶ Check that the tool is switched off before inserting the battery.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, squash or incinerate batteries and do not subject them to temperatures over 80°C
(176°F).
▶ Do not attempt to charge or continue to use damaged batteries.
▶ If the battery is too hot to touch it may be defective. In this case, place the power tool in a non-flammable
location, well away from flammable materials, where it can be kept under observation and allowed to
cool down. Contact Hilti Service after the battery has cooled down.
3 Description
3.1

Product overview

3.2

Intended use

The products described here are industrial vacuum cleaners designed for universal, commercial use. They
can be used for wet or dry applications.
The product can be powered by the electric mains supply or operated cordlessly using Hilti 36V Li­ion
batteries. When powered by the electric mains supply, the appliance can be used simultaneously as a
charging station for all Hilti Li­ion batteries (14V/22V/36V).
When the adapter plate and pushbar are fitted (accessories), the vacuum cleaner can be used as a trolley to
transport up to three Hilti toolboxes.
▶ Use only Hilti Li-ion batteries from the B 36 series with this product.
24 English
1
Grip
@
Control switch
;
Catch
=
Waste material container
%
Gripping areas
&
Hose socket
(
Cover for hose inlet fitting (VC 20-UM-Y OR
)
VC 40-UM-Y)
Electric tool power outlet
+
Hose holder
§
Supply cord stowage point
/
Vacuum cleaner top section
:
Battery cover locking clip
∙
Hose diameter setting (VC 20-UM-Y OR
$
VC 40-UM-Y)
Pushbar attachment point
£
State of charge display
|
Filter cleaning system ON/OFF button
¡
Charging station status indicator
Q
Battery compartment
W
Filter cover retaining screws
E
Automatic filter cleaning system status indi-
R
cator
2055199
*2055199*