Inhaltsverzeichnis
Werbung
INTENDED USE - This multi-purpose workbench has been designed and built exclusively to perform trimming
and cutting operations.
UNINTENDED USE - IT is forbidden to:
• operate on metals, organic materials and/or food stuff s;
• operate on materials which may release toxic substances during the work process;
• use any type of lubricant during cutting;
• cut wood with a thickness of over 83 mm
• cut metal, stone, rubber, plastic, gypsum, glass wool, etc.;
• install diff erent tools or blades to those envisaged;
• use the machine as a portable or unfi xed table saw;
• modify the table saw, the safety devices, guards or switches;
• use the table saw to cut blind grooves;
• use the table saw to make carvings or grooves.
• Tut irregularly shaped blocks or pieces of wood. Cutting twisted, knotted and misshapen pieces of
wood which prevent the use of a goniometer or parallel guides
This table saw is not suitable for use in potentially explosive atmospheres.
RESIDUAL RISKS
Shearing, cutting and severing hazard - Risk indicated by this symbol:
Friction or abrasion hazard - This risk is due to the presence of the rotating blade.
Precautions to be taken
• When working with the tool do not wear work gloves.
• Keep hands away from the work area.
• Never remove cuttings or fragments from the machine when the blade is rotating.
Risk of fl ying debris - This risk is due to the presence of the rotating tool.
Precautions to be taken
• When working with the tool, always wear the necessary personal protective equipment: safety goggles,
safety shoes.
• Keep your face away from the cutting area;
• Let the cut piece fall onto the base of the machine;
• Never bring hands anywhere near the cutting zone until the head has returned to its full height
and the blade has come to a complete standstill;
• To avoid breaking the blade, reduce pressure as soon as the blade comes into contact with
the workpiece;
• for electronic saws, in the event of excessive cutting pressures, the current limiter will trip.
• Lessen the cutting pressure to safeguard the machine.
INFORMATION CONCERNING NOISE - The noise values indicated are emission levels and not
necessarily safe operating levels. While there is a correlation between emission levels and exposure
levels, this cannot reliably be used to determine whether or not further safety precautions are needed.
Factors which infl uence the real level of a worker's exposure include the duration of exposure, the
characteristics of the working environment, other sources of noise, for example the number of machines
or operations being carried out in the near vicinity. Furthermore, levels of safe exposure may be fi xed
diff erently from one country to another. This information does however help the machine user to better
assess the hazards and risks.
It is advisable to use suitable hearing protection such as earmuff s or ear plugs.
INFORMATION ON ELECTROMAGNETIC COMPATIBILITY - Electromagnetic emissions from the
machine do not exceed the limits defi ned by the relative standards for the envisaged conditions of use.
Check that the power supply system is equipped with a thermomagnetic circuit breaker to protect
all conductors from short circuit and overloads.
Vibrations - The mean frequency-weighted r.m.s. hand-arm acceleration value in normal cutting
conditions using correctly sharpened blades, is less than 2.5 m/sec
Test measurements were carried out in accordance with Standards EN ISO 5349-1 and 5349-2.
Vibrations during real machine use may diff er from those declared as the total vibration value
depends very much on how the machine is used.
It is therefore necessary to identify the most appropriate safety measurements to safeguard the
operator based on estimated exposure times and real conditions of use.
EN
USE
56
.
2
Werbung
Inhaltsverzeichnis
