Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
c)
In case of open flames or fire, use only dry powder or snow (CO2) fire extinguishers to extinguish the live equipment.
d) No children or unauthorized persons are allowed in the work area. (Inattention may result in loss of control of the unit.)
e) Use the unit in a well-ventilated area.
f)
Running the unit can generate dust and splitter, protect bystanders against any harm.
g) Check the condition of the safety stickers regularly. Replace them if they are illegible.
h) Keep these instructions for use for future reference. If the unit is to be passed on to a third party, the operating
instructions must also be handed over together with the unit.
i)
Keep the packaging and small assembly parts out of the reach of children.
j)
Keep the unit away from children and animals.
k) When using this unit together with other units, also follow the other instructions for use.
Remember! When using the device, protect children and other bystanders.
2.2.
Personal safety
a)
Do not operate this unit if you are tired, ill or under the influence of alcohol, drugs or medication that could impair your
ability to operate the unit.
b)
The unit may be operated by persons who are physically fit, capable of operating it and appropriately trained, and who
have read this instruction manual and have been trained in occupational safety and health.
c)
The machine is not intended to be used by persons (including children) with reduced mental, sensory or intellectual
functions or persons who lack experience and/or knowledge unless they are supervised or have been instructed by a
person responsible for their safety on how to operate the machine.
d)
Use caution and common sense when operating this unit. A moment's inattention during operation may result in serious
personal injury.
e)
Use personal protective equipment as required when operating the unit as specified in Section 1 of the explanation of
symbols.
The use of appropriate, approved personal protective equipment reduces the risk of injury.
f)
Do not overestimate your capabilities. Maintain body balance and equilibrium at all times during operation. This allows
for better control of the machine in unexpected situations.
g)
Before switching the unit on, remove any regulating tools or keys. Any tools or keys left in the rotating part of the unit
may cause injury.
h)
The unit is not a toy. Children should be watched to ensure that they do not play with the unit.
i)
Do not place your hands or any objects inside the running unit!
j)
The operator must wear long pants and full shoes while mowing.
2.3.
Safe device use
a)
Do not overload the unit. Use tools that are suitable for the application. A correctly selected unit will do a better and
safer job for which it was designed.
b)
Do not use the unit if the ON/OFF switch does not function properly (does not turn on and off). Units that cannot be
controlled by the switch are unsafe, cannot operate, and must be repaired.
c)
Keep unused equipment out of the reach of children and out of the reach of anyone unfamiliar with the unit or this
instruction manual. These units is dangerous in the hands of inexperienced users.
d)
Keep the unit in good working condition. Check before each use for general damage or damage to moving parts (cracks
in parts and components or any other condition that may affect the safe operation of the unit). If damaged, have the
unit repaired before use.
e)
Keep the unit out of the reach of children.
f)
Repairs and maintenance should be carried out by qualified personnel using only original spare parts. This will ensure the
safety of use.
g)
To ensure the designed operational integrity of the unit, do not remove factory-installed covers or loosen screws.
h)
When transporting or moving the unit from storage to the place of use, observe the health and safety rules for manual
handling applicable in the country where the unit is used.
i)
Avoid situations in which the machine stops under heavy loads during operation. This can cause overheating of the drive
elements and consequent damage to the equipment.
j)
Do not touch any moving parts or accessories unless the unit is unplugged.
k)
Do not leave the unit switched on unattended.
l)
Clean the unit regularly to prevent permanent dirt build-up.
m) The provided value of vibration emission is measured according to the standard measurement methods. The value of
vibration emission may change if the unit is used under different environmental conditions.
n)
The air supplied to the machine should be dehumidified, clean, and free of contaminants. Contaminants can clog hoses
and cause damage to the machine and its components.
o)
If you notice any leakage from the machine or hoses, immediately disconnect the power supply and correct the fault.
p)
The unit is not a toy. Cleaning and maintenance must not be performed by children without adult supervision.
q)
Do not start up an empty unit.
Werbung
Inhaltsverzeichnis
