Description; Operating Elements And Connections - Loctite 98548 Bedienungsanleitung

2

Description

2.1

Operating Elements and Connections

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
6
1
3
POWER
4 6
2
8
0 10
SPEED
0
VACUUM
7 4 5
FOOT SWITCH
15
Power Switch - LED Lamp signals that the switch is on.
Operation Mode Switch
Speed Adjustment Knob - Adjust the deposit size (0 ~ 10).
Vacuum Adjustment Knob - The suck-back of the adhesive after dispensing.
Vacuum Delay Timer - Adjustable within 0 ~ 3 sec.
Start Interface - Finger switch connection. A higher-ranking controller can also
start the dispensing cycle.
Timer Buttons
Timer Display - 4-digits display.
CCW/CW Switch - CCW: Counterclockwise / CW: Clockwise.
Guide Lock - To fix the tube guide.
Tube Guide - To support a tube installed in the roller.
Pump Head - To extract liquids from a tube.
Tube Holder with locking knobs - To hold tube.
Power Connection with Fuse T1A fast-acting.
Start/Ready Signal Interface - The optional footswitch 97201 is connected
here. It is also the output for the READY signal.
Power Select - Selector for 220 V AC or 110 V AC
Manual Applicator with Finger Switch - Length of PTFE tube: 1 m.
Applicator Nozzle - different sizes are available, see Section 7.1.
PTFE-Tube - (not shown) different sizes are available, see Section 7.1.
8 2 10 11 12
TIME DISPLAY
R.C
MODE
TIMER
CONT.
CW
DRIV
CCW
10 0 10
V.INT OUT IN
9 6
Henkel Loctite Deutschland GmbH
ACPower PowerSelect
Arabellastr. 17
D-81925 M }nchen
Henkel Corporation
1001 Trout Brook Crossing
Rocky Hill, CT 06067, USA
220V
14 16
R.C. Mode - The Remote Control Mode.
Timer Mode - Time range: ~ 99.99 sec.
Cont. Mode - Continuous operation.
- To adjust dispensing time from 0.01 ~ 99.99 sec.
13
17
110/230 VAC, 50/60 Hz
power consumption: 10 W
Fuse for 110 VAC - ????
Fuse for 230 VAC - ????
Item no: 98548
(Place for serial no.)
Made in Korea
18