Annex; Accessories And Spare Parts; Declaration Of Conformity - Loctite 98548 Bedienungsanleitung

7

Annex

7.1

Accessories and Spare Parts

Pos. No. Description
–
–
–
17
18
–
–
7.2

Declaration of Conformity

The Manufacturer
according to the EC regulations
declares that the unit designated in the following is, as a result of its design and construction, in
accordance with the European regulations, harmonized standards and national standards listed
below.
Designation of the unit
Unit number
Applicable EC Regulations
Applicable harmonized standards
Date/Manufacturer's signature
For changes to the unit that were not approved by Loctite, this declaration loses its validity.
14
Foot Switch............................................................................ 97201
Standard Pump Head ............................................................ 989401
Manual Applicator Assembly.................................................. 989400
Applicator Nozzle Ø 1.2 mm .................................................. 989937
Applicator Nozzle Ø 1.5 mm .................................................. 989402
Applicator Nozzle Ø 1.9 mm .................................................. 989403
Applicator Nozzle Ø 2.4 mm .................................................. 989404
Tubing, black, 11 Gauge, ID 2.4 x 0.4 mm (OD 3.2), 20 m ..... 8951105
Tubing, black, 13 Gauge, ID 1.7 x 0.4 mm (OD 2.5), 20 m ..... 8951151
Tubing, clear, 16 Gauge, ID 1.4 x 0.3 mm (OD 2.0), 20 m...... 989407
Tubing, clear, 19 Gauge, ID 1.0 x 0.3 mm (OD 1.6), 20 m...... 989410
Needle Variety Kit .................................................................. 97262
Syringe & Applicator Holder ................................................... 98501
Declaration of Conformity
Henkel Loctite Deutschland GmbH
Arabellastraße 17
D-81925 München
Benchtop Peristaltic Dispenser
98548
EC Directive for Low Voltage 73/32/EEC. 93/68/EEC
EC Directive for Electro-Magnetic Compatibility
89/336/EEC, including changes 91/263/EC,
92/31/EC and 93/68/EC
EN 61010-1:2001, EN 50081-2:1993 (Class A),
EN 61000-3-2:2000, EN 6100-3-3:1995,
EN 6100-6-2:1999
05/10//2005 / General Manager
Loctite No.
A. Gschiel