Shutdown; Return To Operation - Loctite 98548 Bedienungsanleitung

4 Setup and Operation
R.C. MODE:
• Switch button MODE 2 to R.C.
The dispensing takes place as long as:
– The foot switch is pressed,
– The finger switch is pressed or
– A start signal from a higher-ranking controller is present.
CONT. MODE:
• Switch button MODE 2 to CONT.
Switch to this mode only when
– The manual applicator 16 with dispensing nozzle is placed at the
dispensing position or
– A cup is placed under the nozzle.
After 1 sec. the unit automatically starts and runs continuously.
4.4

Shutdown

• Switch off the dispenser.
4.5

Return to Operation

• Switch on the dispenser.
Be careful when returning to operation in cont. MODE.
1 sec after switching on the unit the dispensing starts automatically!
The manual applicator 16 with dispensing nozzle should be placed at the dispensing
position or a cup is placed under the nozzle.
11