Controlling The Luminaire Via Bluetooth And App; Transporting Or Storing The Luminaire - Instarter Spectar Rgb Led Panel 5.0 Gebrauchsanleitung

Colour saturation 1-100:
5. Turn the function knob (7) to the right or left until the colour saturation
corresponds to your idea.
→ The corresponding colour saturation (S) is shown in the bottom line
of the display (10).
Light effect 01-09:
6. Turn the function knob (7) to the right or left until the desired effect is
achieved.
→ The selected effect is shown in the top line of the display (10).
→ The luminaire has the effects 01 thunderstorm, 02 lightning storm,
03 TV, 04 slow RGB colour change, 05 fast RGB colour change,
06 candlelight, 07 police car (red-blue), 08 ambulance (white-blue),
09 fire engine (white-red).
7. To end the selected function, briefly press the function rotary knob (7).

7.7 Controlling the luminaire via Bluetooth and app

You can find out how to control the luminaire via Bluetooth and the Instarter
Spectar LED app in the self-explanatory app.
8.

Transporting or storing the luminaire

1. Switch off the luminaire. To do this, move the on/off switch (8) to the
position [0].
2. Pull the mains plug out of the socket and the appliance plug out of the
power supply unit.
3. Pull the plug of the power supply unit out of the socket (5) on the back
of the luminaire.
4. Slide the batteries upwards out of the battery holders and place them
safely.
5. Let the luminaire cool down completely.
6. Clean the luminaire if necessary (see chapter 9).
EN
37