Unpack And Inspect The Luminaire - Instarter Spectar Rgb Led Panel 5.0 Gebrauchsanleitung

ATTENTION
Danger of burns caused by hot luminaires.
The housing and the lamps can become very hot.
■ Do not touch the luminaire or the lamps during operation or
cooling down.
■ Always allow the luminaire to cool down before packing, transporting
or adjusting it.
ATTENTION
Precautions for use with rechargeable batteries
■ Use only the batteries specified in the instruction manual.
■ Protect the luminaire and batteries from open flames and
excessive heat.
■ The batteries cannot be charged in the luminaire. Use a suitable
charger for this purpose.
■ Do not leave the batteries unattended when charging them.
■ Do not charge with a damaged charger or cable.
■ Disconnect the charger from the mains as soon as charging is
complete.
4.

Unpack and inspect the luminaire

1. Carefully unpack all parts.
Check whether the scope of delivery is complete:
2.
■ 1× luminaire Instarter Spectar RGB LED Panel 5.0
■ 1× diffuser
■ 1× power supply unit
■ 1× bag
■ 1× safety instructions
3. Check that the luminaire and accessories are undamaged.
NOTE - If the scope of delivery is incomplete or parts are damaged,
please contact info@instarter.de.
We reserve the right to make technical and optical changes in the course of
product improvements. Illustrations may then only be similar.
28