air&me LARY Bedienungsanleitung Seite 16

COMPONENTS (SEE PAGE 2)
Air outlet
1
Digital display
2
ON/OFF button
3
Pre-filter
4
Air inlet
5
DIGITAL DISPLAY (SEE PAGE 2)
Hygrosmart
®
A
Clothes dryer mode
B
Night mode
C
Fan operating indicator light
D
"Full tank" alert
E
USE PRECAUTIONS
• Make sure the product is placed on a dry, level surface.
• Leave at least 50 cm space behind, on the sides and in front of the unit.
• Make sure that the removable filter and the tank are correctly positioned and depressed.
• Do not remove the float from the tank, as this will prevent the unit from starting.
OPERATING INSTRUCTIONS
Make sure that the product is placed on a dry flat surface. Leave at least 20cm behind, around
and in front of the appliance. Make sure that the pre-filter and the tank are correctly placed.
1. Plug the appliance.
2. Press the ON/OFF button:
• The digital display will flicker during the stabilisation time and then, it will display the humidity
rate of the room air.
• Lary automatically starts in HYGROSMART
3. Press ON/OFF twice to select "CLOTHES DRYER" MODE.
4. Press ON/OFF a third time to select NIGHT MODE.
5. Press ON/OFF for a long time to turn the appliance off. The fan will stop after 30 seconds.
16
Function
Continuous drainage outlet
6
Tank
7
Tank handle
8
Multidirectional casters
9
Continuous drainage hose
10
Display of the humidity rate of room air:
F
• Between 40 and 60%, the display is green to indicate
an ideal humidity rate.
• Below 40%, the display is blue to indicate a too dry
air.
• Above 60%, the display is red to indicate a too humid
air.
FUNCTION.
®