Compass ICE BOX DUO Bedienungsanleitung Seite 20

�
Food storage
Refrigerator (0°C ~ 20°C)
• Suitable for example, eggs, butter, milk, drinks in closed containers or other packaging.
• Fruits and vegetables are recommended to be placed in bags to preserve freshness.
• Never place warm food in the cooler. Always let it cool to room temperature, before putting them in the cooler.
• By leaving free space between individual foods, better air circulation is achieved with a subsequent increase in
energy efficiency and faster cooling.
Freezer (-20°C)
• When buying frozen food, it is necessary to put it back in the freezer as quickly as possible.
• Do not place glass containers or packages containing closed liquids in the freezer.
• Liquid expansion could cause cracking and other similar damage.
• Do not place fresh and frozen food together.
• Do not place fruit and vegetables in the freezer, they could dry out.
Defrosting
After the refrigerator has been operating for a certain period of time, frost forms on the surface in the freezer, which
reduces the cooling effect and increases power consumption.
In this case, defrosting is necessary.
Disconnect the power and open the door, remove the food from the refrigerator.
Use the defroster to remove ice and frost (you can also leave the door open, then the ice melts itself by increasing
the temperature). Wipe off the remaining ice and water.
Then place the food back in the refrigerator and plug the power supply back in.
Caution: Do not use sharp objects to scrape the ice, the cooling box could be damaged.
Cleaning and maintenance
Disconnect the power supply before cleaning!
Use a soft, damp cloth in hot water to wipe the interior surfaces and exterior of the refrigerator.
To clean stubborn stains, use a neutral detergent, then dry the refrigerator with a clean, soft cloth.
During a long vacation or absence, remove the food and disconnect the refrigerator from the power supply.
Clean it and leave the door open and place the refrigerator in a ventilated room
Caution: Do not rinse the refrigerator with water during cleaning, this can reduce the electrical insulation properties
components and can lead to erosion of metal components.
Do not use cleaning agents containing corrosive and crushed material (e.g. cleaning powders, bleaches, alkaline
cleaners, benzene, gasoline, acids, hot water, etc.)
Product storage, maintenance and cleaning
-20-