Sharp Party Street Beat PS-949 Bedienungsanleitung Seite 10

9
Troubleshooting
To keep the warranty valid, never try to repair the system yourself. If you
encounter problems when using this unit, review the following before
requesting service
No power
Ensure that the AC cord is properly connected and/or the battery is fully
charged. Ensure that there is power at the AC outlet.
No sound
Increase the volume. Turn the volume Control Knob clockwise.
Turn the mute function off.
Check the volume on the connected device is not at zero or mute.
Check you are on the correct source for your device.
Check you have placed a media USB into the correct USB port.
I hear buzzing or humming
Ensure all cables and wires are securely connected. Connect a different
source device (mobile device if Bluetooth, media player if Aux, etc) to
see if the buzzing persists. If it does not, the problem may be with the
original device. Connect your device to a different input if the device
allows.
I can't find the Bluetooth name of this unit on my Bluetooth device
Ensure the Bluetooth function is activated on your Bluetooth device.
Re-pair the unit with your Bluetooth device.
No sound from my microphone
Check the microphone has the switch set to "on".
Check the Mic volume on the XParty Street Beat is above zero for the mic
you are using.
Check the mic is input into Mic1 or Mic2 inputs correctly.
Can't connect to the Sharp Life App
Ensure you have cleared all Bluetooth connections prior to connecting
to the app.
If in doubt, reset the unit by long pressing the EQ button to reset to
factory settings.