Beem FRESH-AROMA-PERFECT Gebrauchsanleitung Seite 35

33
Descaling
Limescale deposits have an adverse effect not only on the quality of the coffee and
the water, but they also cause power losses and shorten the lifespan of the device.
The thicker a limescale layer is, the more difficult it is to remove.
We therefore recommend regularly removing limescale deposits with a descaling agent in
accordance with the water quality in your area and how often the device is used (approx. every
2 – 6 weeks).
The first indications that descaling is required are a large amount of steam being produced and
slower brewing of the coffee.
For descaling we recommend the BEEM premium descaler concentrate. The efficient, food-safe and
environmentally friendly BEEM premium descaler concentrate is avail able from selected specialist
stockists, via our website www.beem.de or from our customer service department on request.
Descaling with the BEEM Premium Descaler Concentrate
1. Fill the water tank (13) up to the 10-cup mark with a concentrate/water solution of no
more than 1:20 (one part concentrate to 20 parts water).
2. Let the descaling solution take effect for a little while.
3. Press the button
through.
4. To rinse the device, allow two tankfuls (10 cups) of clear water to run through it. The device
is now descaled and ready to be used again.
Storage
Disconnect the device from the mains power when it is not going to be used for a prolonged
period. Clean the device again if necessary (see the "Cleaning and Care" chapter) and let it dry
completely.
Store the device and all accessories in a dry, clean, frost-free place that is protected from direct
sunlight and cannot be accessed by children or animals.
(20) to switch on the device. Allow the descaling solution to run
EN