Determine Cutting Line; Guide Rail Splinter Guards - Tectool Tsf 55 Originalbetriebsanleitung

DETERMINE CUTTING LINE

When using the saw with guide rail
always align position A (0 mark on
base plate) at the front of the base
plate with your marked cutting line
for straight cuts and 45° miter cuts.

GUIDE RAIL SPLINTER GUARDS

The guide rails come with a splinter guard (black protruding rubber lip). The
splinter guard should be cut to size before first use. The splinter guard
ensures a tear-free cut, since the wood fibers at the top of the work piece are
torn without splinter guard. This is due to the saw blade teeth being directed
upward.
After cutting the splinter guard to size it also shows the precise cutting path of
the saw blade.
45