Important Notice - Tectool Tsf 55 Originalbetriebsanleitung

e) Maintain power tools. Check for misalignment or sticking of moving parts,
breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to stick and are easier to control.
g) Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from intended could lead to a
hazardous situation.
5. Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.

Important Notice

• Make sure that the mains voltage matches the specifications on the type
plate.
• Persons with restricted physical, sensory or mental capabilities are not
allowed to use the circular saw unless they are supervised and instructed by a
guardian.
• Never leave the powered-on saw unattended and keep them out of reach of
children and persons in need of supervision.
• Use only approved extension cords with a suitable cable quality.
• Do not bring your hands in the cutting area and the saw blade.
• Wear appropriate work clothing as well as eye protection, hand protection
and hearing protection. Always handle the saw blade with gloves.
33