Haier HSW59F18DIMM Benutzerhandbuch Seite 39

WARNING!
► Ensure that the connections are always firm, dry and leak free.
► Make sure the hose is never crushed, kinked, or twisted.
Aligning the appliance
The appliance should be placed on a flat and solid
surface.
1. Tit the appliance slightly backwards (Fig.7).
2. Set the feet to the desired level. Make sure the
distance to the wall on the hinge sides is at least 10
cm.
3. The stability can be checked by alternately
bumping on the diagonals. The slightly swaying
should be the same in both directions. Otherwise
the frame can warp possible leaking door seals are
the result. A low tendency to the rear facilitates the
closing of the doors.
Fine tuning of the doors
If the doors are still not in one level after levelling the
doors by the feet, this mismatch can be remedied
by turning the hinge lifting shaft at the right bottom
corner of refrigerating door with a spanner (Fig.8)
Clockwise turn lifting shaft with spanner to lower
door height (Fig.9).
Antic lock wise turn lifting shaft with spanner to lift
door height (Fig.10).
40
Installation
CONTENTS