Instructions For Use; Remote Control; Memory Function - Rotel Oscillatingstandventilator736Ch1 Gebrauchsanweisung

• INSTRUCTIONS FOR USE

o
Before using the fan make sure that it stands on a flat and
stable surface.
o
Press the POWER button to start the fan at the default speed
of 3.
o
Press the OSC key and the fan head oscillates to the left and
right. Press several times to select whether the fan head
should oscillate 30, 60 or 90°.
o
NOTE: Vertically, the fan head can be adjusted manually from
-10 to 30°.
o
Timer OFF function: While the unit is in operation, press the
Timer button repeatedly to select the desired time for switch-
ing off from 1 - 8 hours.
o
The fan has 8 speed levels that can be switched between by
pressing the Fan button.
NOTE: To switch off the display, press the Fan button for 3s.
Press any key to switch the display back on.
o
The POWER button can be used to switch the unit off again.

• REMOTE CONTROL

o
All functions can also be controlled via the remote
control.
o
It is magnetic and can be fixed on the back of the
motor.

• MEMORY FUNCTION

o
If the fan is switched off using the POWER button, the speed
and the oscillation setting are stored.
o
Pulling out the mains plug resets the unit to the factory set-
ting.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
28