Connection Of Drain Hoses - Kuppersberg GFM 4275 GW Bedienungsanleitung

TECHNICAL PASSPORT
Dishwasher

CONNECTION OF DRAIN HOSES

Insert the drain hose into a drain
pipe with a minimum diameter of 4 cm,
or let it run into the sink, making sure
to avoid bending or crimping it. The
height of drain pipe must be less than
Fix the drain pipe with suction cups
How to drain excess water from
hoses
If the sink is 1000 higher from the
floor, the excess water in hoses cannot
be drained directly into the sink. It will
be necessary to drain excess water from
hoses into a bowl or suitable container
that is held outside and lower than the
sink.
Water outlet
Connect the water drain hose. The
drain hose must be correctly fitted to
avoid water leaks. Ensure that the water
drain hose is not kinked or squashed.
60
1000mm. The free end of the hose must
not be immersed in water to avoid the
back flow of it.
in either position A or position B.
или
Extension hose
If you need a drain hose extension,
make sure to use a similar drain hose.
It must be no longer than 4 meters;
otherwise the cleaning effect of the
dishwasher could be reduced.
Syphon connection
The waste connection must be at
a height less than 100 cm (maximum)
from the bottom of the dish. The water
drain hose should be fixed .
Please securely fix the drain hose
Fix the drain pipe with the back
pipe of the machine.The interface
is fitted with clamps and tightened
with a screwdriver.
ENGLISH