Maintenance And Cleaning - Kuppersberg GFM 4275 GW Bedienungsanleitung

ENGLISH
MAINTENANCE AND
CLEANING
Filter system
WANING
The filter efficiently removes food
particles from the wash water , allowing
it to be recycled during the cycle.
For best performance and results,
the filter assembly must be cleaned
regularly
For this reason, it is a good idea to
move the larger food particles trapping
in the filter after each wash cycle by
rinsing the filter and cup under running
water.
To remove the filter assembly, rotate
the filter handle anticlockwise and then
pull the handle in the upward direction.
B. Fine filter
This filter holds soil and food
residues in the sump area and prevents
it from being deposited on the dishes
during wash cycle.
A. Main filter
Food and soil particles trapped in
this filter are pulverized by a special
jet on the lower spray arm and washed
down to drain.
Step 1: Contrarotate the filter
assembly, then lift it all up.
Step 2: Lift fine filter up from main
filter.
NOTE
If do it from step1 to step 2, the filter
system will be removed; while if do it
B
from Step 2 to Step 1, the filter
system will be installed.
The entire filter assembly should be
A
cleaned once a week..
 Inspect the filters for blocking
after every time the dishwasher has
been used.
 By unscrewing the coarse filter,
you can remove the filter system.
Remove any food remnants and clean
the filters under running water.
When cleaning the filters, don't
knock on them. Otherwise, the filters
could be contorted and the performance
of dishwasher could be decreased.
TECHNICAL PASSPORT
WARNING
Dishwasher
55