How To Keep Your Dishwasher In Shape - Kuppersberg GFM 4275 GW Bedienungsanleitung

ENGLISH
checking that their rotary movement is
in no way impeded.
Grasp the middle of the spray arm,
pull it upwards to remove it. Wash the
arms under a jet of running water and
replace it carefully to its seat. After
reassembly, check that the spray arms
rotate freely. Otherwise, check that they
have been installed correctly.
HOW TO KEEP YOUR
DISHWASHER IN SHAPE
After every wash
After every wash, turn off the water
supply to the appliance and leave the
door slightly open so that moisture and
odours are not trapped inside.
Remove the plug
Before cleaning
maintenance, always remove the plug
from the socket.
No solvents or abrasive
cleaning
To clean the exterior and rubber
parts of the dishwasher, do not use
solvents or abrasive cleaning products.
Only use a cloth with warm soapy water.
the surface of the interior, use a cloth
dampened with water an a little vinegar,
or a cleaning product made specifically
for dishwashers.
cycle with the dishwasher empty and
then remove the plug from the socket,
leave the door of the appliance open.
This will help the door seals to last
longer and prevent odours from forming
within the appliance.
try to keep it in the vertical position.
If absolutely necessary, it can be
positioned on its back.чтобы задняя па-
нель находилась снизу.
or performing
TECHNICAL PASSPORT
To remove spots or stains from
When not in use for a longtime
It is recommend that you run a wash
Moving the appliance
If the appliance must be moved,
Dishwasher
57