Using Your Dishwasher; Loading The Salt Into The Softener - Kuppersberg GFM 4275 GW Bedienungsanleitung

ENGLISH

USING YOUR DISHWASHER

LOADING THE SALT INTO THE SOFTENER

NOTE.
If your model have no water softener,
you may skip this section.
WANING
Only use salt specifically designed
for dishwashers use!
Every other type
specifically designed for dishwasher
use, especially table salt, will damage
the water softener. In case of damages
A. Remove the basket and then
unscrew and remove the cap from the
salt container.
B. Before first wash, add 1lt. of water
in the salt container of your machine.
C. Place the end of the funnel (if
supplied) into the hole and introduce
about, 0.13kg of salt. It is normal for a
small amount of water to come out of
the salt container.
D. After filling the container, screw
the cap tightly back clockwise.
after the salt container has been
filled with salt.
caused by the use of unsuitable salt
the manufacturer does not give any
warranty nor is liable for any damages
caused.
cycle.
of salt not
or salty water, which may have been
spilled, remaining on the bottom of the
machine for any period of time, which
may cause corrosion.
be cease to be illuminated within 2-6
days after the salt container has been
filled with salt.
salt into the salt container, a washing
programme should be started (Suggest
choose rapid program). Otherwise filter
system, pump or other important parts
of the machine may be damaged by
salty water. It is out of warranty.
refilled when the salt warning light in
TECHNICAL PASSPORT
Only fill with salt before running a
This will prevent any grains of salt
E. Usually, the salt warning light will
F. Immediately after filling the
NOTE:
 The salt container must only be
Dishwasher
45