Quick User Guide - Kuppersberg GFM 4275 GW Bedienungsanleitung

TECHNICAL PASSPORT
Dishwasher

QUICK USER GUIDE

Connected to power supplies
The power supply is 220-240V AC
50Hz the specification of the socket is
10A 250V AC
Add water into the dishwasher's
tank
Note: Before adding water , you
need to press power button to turn on
the diswasher
There are two ways to add water
into the tank:
 Connect inlet hose to the tap;
 Open the cap and add water into
the dishwasher's tank manually
There are two ways of prompting
the tank that full of water
40
или
ix the drain pipe with
suction cups
The connection of the drain pipe: Put
end of the drain into a sink or bucket.
Fix the drain pipe with the back pipe of the machine.
The interface is fitted with clamps and tightened with a
screwdriver.
1. Before starting:
hen the tank is full of water, the
machine will beep fleetly for 3 seconds.
2. After starting :
Water is not enough,
Water is enough,
and the machine will beep fleetly for 3
seconds.
ENGLISH
light is on;
light will be off