Using Your Dishwasher; Loading The Salt Into The Softener - Kuppersberg GFM 5572 W Bedienungsanleitung

ENGLISH

USING YOUR DISHWASHER

Before using your dishwasher:
1. Set the water softener

2. Loading the Salt Into the Softener

3. Loading the basket
4. Fill the dispenser
Please check the section 1 «Water Softener» of PART II: Special Version, If you
need to set the water softener.
LOADING THE SALT INTO
THE SOFTENER
NOTE:
If your model does not have any wa-
ter softener, you may skip this section.
Always use salt intended for dishwash-
er use.
The salt container is located be-
neath the lower basket and should be
filled as explained in the following:
WARNING
 Only use salt specifically de-
signed for dishwashers use!
Every other type of salt not specifi-
cally designed for dishwasher use, espe-
cially table salt, will damage the water
softener. In case of damages caused by
Inside Outside
the use of unsuitable salt the manufac-
turer does not give any warranty nor is
liable for any damages caused.
a cycle.
or salty water, which may have been
spilled, remaining on the bottom of the
machine for any period of time, which
may cause corrosion.
adding dishwasher salt:
unscrew the reservoir cap.
TECHNICAL PASSPORT
 Only fill with salt before running
This will prevent any grains of salt
Please follow the steps below for
1. Remove the lower basket and
Dishwasher
49