Kress KG155E Bedienungsanleitung Seite 9

cord suitable for outdoor use
reduces the risk of electric
shock.
f) If operating a power tool
in a damp location is
unavoidable, use a residual
current device (RCD)
protected supply. Use of
an RCD reduces the risk of
electric shock.
3) Personal safety
a) Stay alert, watch what
you are doing and use
common sense when
operating a power tool. Do
not use a power tool while
you are tired or under the
influence of drugs, alcohol
or medication. A moment
of inattention while operating
power tools may result in
serious personal injury.
b) Use personal protective
equipment. Always
wear eye protection.
Protective equipment such
as dust mask, non-skid
safety shoes, hard hat, or
hearing protection used for
appropriate conditions will
reduce personal injuries.
c) Prevent unintentional
starting. Ensure the switch
is in the off-position
before connecting to
power source and/or
battery pack, picking up or
carrying the tool. Carrying
power tools with your finger
on the switch or energising
power tools that have the
switch on invites accidents.
d) Remove any adjusting
key or wrench before
turning the power tool
on. A wrench or a key left
attached to a rotating part of
the power tool may result in
personal injury.
e) Do not overreach. Keep
proper footing and balance
at all times. This enables
better control of the power
tool in unexpected situations.
f) Dress properly. Do not
wear loose clothing or
jewellery. Keep your hair
and clothing away from
moving parts. Loose
clothes, jewellery or long
hair can be caught in moving
parts.
g) If devices are provided
for the connection of dust
extraction and collection
facilities, ensure these are
connected and properly
used. Use of dust collection
can reduce dust-related
hazards.
h) Do not let familiarity
gained from frequent
use of tools allow you
to become complacent
and ignore tool safety
principles. A careless action
can cause severe injury
9
EN