Safe Operating Practices - Kress KG155E Bedienungsanleitung

2. Keep a firm footing and
balance during operating.
Use the harness provided.
3. Replace cutting blade
if cracked, chipped, or
damaged in any way. Be
sure the blade is properly
installed and securely
fastened. Failure to do so
can cause serious injury.
4. Keep away from cutting
blade. Even after the motor
has stopped, the cutting
blade will continue to rotate
for several seconds. Please
wait until cutting blade
has fully stopped before
putting the machine down or
12
accessing the cutting area.
EN 5. Switch off the machine when
not cutting. Never leave
the machine running when
unattended.
GENERAL SAFETY
WARNINGS
WARNING Read all
safety warnings and all
instructions. Failure to follow
the warnings and instructions
may result in electric shock, fire
and/or serious injury.
Save all warnings and
instructions for future
reference.
The appliance is only to
be used with the power
supply unit provided with the
appliance.
IMPORTANT
READ CAREFULLY BEFORE
USE
KEEP FOR FUTURE
REFERENCE

Safe operating practices

1. Training
a) Read the instructions
carefully. Be familiar with the
controls and the correct use
of the machine.
b) Never allow children,
persons with reduced
physical, sensory or mental
capabilities or lack of
experience and knowledge
or people unfamiliar with
these instructions to use the
machine, local regulations
may restrict the age of the
operator.
c) Keep in mind that the
operator or user is
responsible for accidents or
hazards occurring to other
people or their property.
2. Preparation
a) Before use, always visually
inspect the machine for
damaged, missing or
misplaced guards or shields.
b) Never operate the machine
while people, especially