Kress KG155E Bedienungsanleitung Seite 10

within a fraction of a second.
4) Power tool use and care
a) Do not force the power
tool. Use the correct
power tool for your
application. The correct
power tool will do the job
better and safer at the rate
for which it was designed.
b) Do not use the power
tool if the switch does
not turn it on and off. Any
power tool that cannot be
controlled with the switch
is dangerous and must be
repaired.
c) Disconnect the plug from
the power source and/
10
or remove the battery
pack, if detachable, from
EN
the power tool before
making any adjustments,
changing accessories, or
storing power tools. Such
preventive safety measures
reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out
of the reach of children
and do not allow persons
unfamiliar with the power
tool or these instructions
to operate the power tool.
Power tools are dangerous
in the hands of untrained
users.
e) Maintain power tools and
accessories. Check for
misalignment or binding
of moving parts, breakage
of parts and any other
condition that may affect
the power tool's operation.
If damaged, have the
power tool repaired before
use. Many accidents are
caused by poorly maintained
power tools.
f) Keep cutting tools sharp
and clean. Properly
maintained cutting tools with
sharp cutting edges are less
likely to bind and are easier
to control.
g) Use the power tool,
accessories and tool
bits etc. in accordance
with these instructions,
taking into account the
working conditions and
the work to be performed.
Use of the power tool for
operations different from
those intended could result
in a hazardous situation.
h) Keep handles and
grasping surfaces dry,
clean and free from oil and
grease. Slippery handles
and grasping surfaces do
not allow for safe handling
and control of the tool in
unexpected situations.
5) Battery tool use and care
a) Recharge only with the
charger specified by the
manufacturer. A charger
that is suitable for one type