How to Use the App
This appliance allows you to operate the unit via your home network.
A prerequisite is a permanent Wi-Fi connection to your router and the
"ecofort" app.
1.
Install the "ecofort" app and create a user account.
2.
Activate the Wi-Fi function by long pressing the timer button on
the unit.
3.
Place the unit within range of your router.
4.
As long as the power is turned on, the Wi-Fi indicator flashes.
After 3 minutes, the status will be canceled if there is no network
configuration and the indicator light goes off. If you need to re-
connect the Wi-Fi, long press the "timer" button for 5 seconds
to re-start the network configuration, the Wi-Fi indicator flashes
again.
Wi-Fi Connection
Method 1: Connect via Bluetooth
Activate Bluetooth on your mobile phone or other device.
When the Wi-Fi indicator on the unit flashes, open the "ecofort" App, the unit will connect
via Bluetooth automatically.
Method 2: Connect via Wi-Fi
When the Wi-Fi indicator on the unit flashes, select "Add Device" and "Portable Air
Conditioner (Wi-Fi)" on your smartphone or tablet, and follow the instructions on the
display.
Check the status of the Wi-Fi indicator and choose the correct status.
If the Wi-Fi indicator flash rapidly, it can connect directly.
If the Wi-Fi indicator flash slowly, press "Go to Connect" to connect the Wi-Fi named
"ecofort".
p Note: Once the unit has been successfully connected, the Wi-Fi lamp stays lit.
Now you can operate the unit by using the app.
Press and hold the Timer button for about 5 seconds, to disconnect the unit, the
Wi-Fi indicator lamp will go off.
Owner's Manual ecoQ CoolAir 12+
|
97