Information For Use; Intended Use - Konig & Meyer Easy Lock Nutzungsinformation

21444 Adapter sleeve
21444 »Easy Lock«

Information for use

Intended use

The patented adapter sleeve »Easy Lock« makes it possible to place speakers on a stand wit-
hout any play, extremely fast and in just one motion. The movable plastic splints provide for a
vibration-free connection between the speaker and stand. The adapter sleeve can accommodate
speakers with a flange bushing diameter of 35 to 37 mm and has a load capacity of 50 kg. The
adapter sleeve »Easy Lock« can be attached to speaker stands with a rod diameter of 35 mm.
The adapter is fixed in place on the stand using the clamping screw.
Foreseeable misapplication
Clamping screw must not be opened during use. The load capacity of the stand used must be
observed.
General
u The safety information for the stand used must be observed.
u The stand must have a rod diameter of 35 mm
u The load capacity of the stand must not be exceeded.
u Placement of the speaker creates a pinch hazard between the components.
u The installation height creates a risk of falling parts.
u Personal injury or property damage may occur if the adapter sleeve falls down.
u Due to the adjustability of the components, there is finger trap risk between the components.
u The user should be physically fit and technically competent.
u The usage information is an integral part of the product and should be kept for its service life
u
or passed on to any subsequent owner or user.
Warranty
No warranty is given for damage caused by:
u Non-observance of the usage information and the "General safety and assembly instructions".
u Unsuitable or improper use.
u Incorrect installation or commissioning by the buyer or third parties.
u Natural wear and tear.
u Careless handling.
u Improper modifications or repair work by the buyer and third parties.
u Impact on components of foreign origin.
u Use of non-original spare parts.
Modifications, additions and conversions that may impair safety are prohibited without the manu-
facturer's approval.