Troubleshooting; Declaration Of Conformity - Kress KG347E Serie Bedienungsanleitung

TROUBLESHOOTING TABLE
The following table gives checks and actions that
you can perform if your machine does not operate
correctly. If these do not identify/remedy the problem,
contact your service agent.
WARNING: Switch off and remove plug from
power source before investigating fault.
Symptom Possible Cause
Chainsaw fails Low battery
to charge.
operate Chain brake not
in the proper
position.
Chainsaw Over heating
operates Applying too
intermittently much pressure
while cutting.
Loose
connection.
Internal wiring
defective.
On/Off switch
defective.
Dry chain No oil in
reservoir.
Vent in oil filler
cap clogged.
Oil passage
clogged.
Kickback Brake does not
Brake/Run stop chain
Down Brake
Chain/chain bar No oil in
over-heats. reservoir.
Vent in oil filler
cap clogged.
Oil passage
clogged.
Chain is over
tensioned.
Dull chain.
Chainsaw rips,
vibrates, does
not
saw properly.
Remedy
Charge both
the battery
DECLARATION OF
packs.
Check to
CONFORMITY
see if the
chain brake
We,
is in position
Positec Germany GmbH
. Refer
Postfach 32 02 16, 50796 Cologne, Germany
to CHAIN
BRAKE for
Declare that the product
details.
Description Battery-powered chainsaw
Type KG347E KG347E.X (3 - designation of
Place the
machinery, representative of Chainsaw)
machine
Function Cutting wood
in a cool,
ventilated
Complies with the following Directives:
place to cool
2006/42/EC, 2014/30/EU
it down.
2011/65/EU&(EU)2015/863
Applying
2000/14/EC amended by 2005/88/EC
relatively less
pressure while
The notified body involved
cutting.
Name: Intertek Deutschland GmbH (Notified body
Contact
0905)
service agent.
Address: Stangenstraße 1, 70771 LEINFELDEN-
Contact
ECHTERDINGEN
service agent.
Certification No.: 20SHW2092-02
Contact
service agent.
2000/14/EC amended by 2005/88/EC:
Refill oil.
- Conformity Assessment Procedure as per Annex V
Clean cap.
- Measured Sound Power Level 101.2 dB(A)
Clean oil
- Declared Guaranteed Sound Power Level 104 dB(A)
passage
outlet.
Standards conform to
EN 62841-1, EN 62841-4-1, EN ISO 3744,
Contact
EN 55014-1, EN 55014-2
service agent
The person authorized to compile the technical file,
Name: Marcel Filz
Refill oil.
Address: Positec Germany GmbH
Clean cap.
Postfach 32 02 16, 50796 Cologne, Germany
Clean oil
passage
outlet.
Adjust chain
tension.
Sharpen chain
or replace.
2021/10/28
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd.
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
Chain tension Adjust chain
too loose. tension.
Dull chain. Sharpen chain
Chain worn out. or replace.
Chain teeth are Replace
facing in the chain.
wrong direction. Reassemble
with chain
in correct
direction.
19
EN