Kress KG347E Serie Bedienungsanleitung Seite 12

1
1
When the log is supported on both ends, as
illustrated in Figure 5, cut 1/3 the diameter from the
top (overbuck) (1). Then make the finished cut by
1
underbucking (2) the lower 2/3 to meet the first cut.
1
1/3
1
1/3
12
EN
1
1/3
When bucking on a slope always stand on the uphill
side of the log, as illustrated in Figure 6. When
"cutting through", to maintain complete control
release the cutting pressure near the end of the cut
without relaxing your grip on the Chainsaw handles.
Don't let the chain contact the ground. After
completing the cut, wait for the saw chain to stop
before you move the Chainsaw. Always stop the
motor before moving from tree to tree.
2
1/3
2/3
2
1/3
2/3
Figure 4
2
1/3
2
2/3
2
2/3
2
2/3
Figure 5
Figure 6
SYMBOLS
2/3
To reduce the risk of injury, user
must read instruction manual
WARNING
Wear ear protection
Wear eye protection
Wear dust mask
Always use chain saw two-handed
Beware of chain saw kickback and
avoid contact with bar tip
Do not expose to rain
Wear head protection
Wear protective gloves
Wear protective footwear
Waste electrical products must
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your local
authorities or retailer for recycling
advice.
Li-Ion battery This product has been
marked with a symbol relating to
'separate collection' for all battery
packs and battery pack. It will
then be recycled or dismantled in
order to reduce the impact on the
environment. Battery packs can be
hazardous for the environment and
for human health since they contain
hazardous substances.