Herunterladen Diese Seite drucken

OSRAM POWERinvert PRO OEINVMA10 Bedienungsanleitung Seite 2

Modifizierter sinus-wechselrichter

Werbung

POWERinvert PRO | Modified Sine Wave Inverter
Warnings*
DANGER! BE AWARE, LEAD-ACID BATTERIES GENERATE EXPLOSIVE GASES DURING
NORMAL BATTERY OPERATION. FOR THIS REASON, IT IS VERY IMPORTANT TO READ
AND FOLLOW THESE INSTRUCTIONS CAREFULLY, EACH TIME YOU USE THE CHARGING
EQUIPMENT.
WARNING! Modern vehicles contain extensive electronic systems. You are required to check with
the vehicle manufacturer, for any specific instructions regarding the use of this type of equipment
on each vehicle.
Charge in a well-ventilated area.
DO NOT operate near flammable liquids or gases.
DO NOT touch the clamps together or allow to touch the chassis.
DO NOT connect the clamps via another metallic object.
DO NOT cross connect power leads from charger to battery. Ensure positive (+/RED)
is connected to positive and negative (-/BLACK) is connected to negative.
DO NOT pull the cables or clamps from the battery terminals.
DO NOT pull or carry the charger by the power cable.
DO NOT pull the plug from the socket by the cable.
DO NOT use worn or damaged cables, plugs or clamps. Any faulty item should be
immediately repaired or replaced by a qualified technician.
DO NOT use the charger for a task for which it is not designed.
DO NOT cover or obstruct the charger ventilation louvres or fan.
DO NOT at the same time charge batteries of different capacities or discharge levels.
OEINVMA10
Modified Sine
Wave Inverter
12V DC 1000W
2

Werbung

loading