Cleaning And Care; Technical Data - Speaka Professional 2498159 Bedienungsanleitung

Click the small empty circle (see upper
arrow in the picture).
Enter the data as shown in the image.
The last block of the IP address is flexi-
ble and can be between 1 and 99 or 101
and 254. The other numbers must be
entered exactly as in the image.
Click OK to confirm.
If there are any problems with the con-
nection, briefly disconnect the HDMI
switch from the power supply after you
have assigned a fixed IP address to the
LAN interface.
10.3 Registering with the web interface
Once connected, open your web browser.
If you have connected your PC directly to the HDMI switch and assigned a fixed IP address
to your LAN connection, enter „http://192.168.1.100/" (without quotation marks) in the ad-
dress bar and confirm.
If you have connected the switch to your network, enter the IP address assigned by your
router to the HDMI switch.
Enter the password „admin" for the user „Admin" and confirm the login.
You should now see the main page of the web interface.
After logging on for the first time, we recommend that you change the password for the
two users "Admin" and "User" (default password = user). The settings can be accessed
on the "Network" page.

11 Cleaning and care

Important:
– Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these
could damage the housing or even impair the functioning of the product.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, lint-free cloth.
12 Disposal
12.1 Product
All electrical and electronic equipment placed on the European market must be
labelled with this symbol. This symbol indicates that this device should be disposed
of separately from unsorted municipal waste at the end of its service life.
All owners of waste equipment are obliged to dispose of waste equipment separa-
tely from unsorted municipal waste. Before handing the old device to a collection
point, end users are required to separate old batteries which are not enclosed by
the old device, as well as lamps which can be removed from the old device without
any damage.
Distributors of electrical and electronic equipment are legally required to accept waste equip-
ment free of charge. Conrad provides the following return options free of charge (more details
on our website):
At our Conrad stores
At the collection points established by Conrad
At the collection points of public waste disposal agencies or at the collection systems set up
by manufacturers and distributors in accordance with the German Electrical and Electronic
Equipment Act.
The end user is responsible for deleting personal data on the old device before disposal.
Please note that in countries outside Germany, other obligations may apply to the return and
recycling of old devices.
12.2 Batteries
If a battery is inserted, remove it and dispose of it separately from the product. As the end user,
you are required by law to return all used batteries (Battery Directive). They must not be placed
in household waste.
Batteries/rechargeable batteries containing hazardous substances are labelled with
this symbol to indicate that disposal in household waste is forbidden. The abbre-
viations for heavy metals in batteries are: Cd=Cadmium, Hg=Mercury, Pb=Lead
(marked on batteries, e.g., under the rubbish bin symbol shown to the left).
Used batteries can be returned to local collection points, our stores or battery retailers. You thus
fulfil your statutory obligations and contribute to environmental protection.
Before disposal, the exposed contacts of batteries must be fully covered with a piece of adhe-
sive tape to prevent short-circuits. Even if batteries are depleted, the remaining energy may
present a hazard in the event of a short-circuit (bursting, severe heating, fire, explosion).

13 Technical data

13.1 Power supply
Input voltage/current ..................... 12 V/DC, 2.5 A
13.2 Switch
Input.............................................. 4x HDMI
Output ........................................... 4 x HDMI, 4x 3.5 mm jack (stereo L/R),
4x RCA digital output
Connections (other) ...................... 1x RJ45 TCP/IP LAN connection, 1x RS232 3-pin screw
connection, 3.5 mm jack (IR receiver)
HDMI version ................................ HDMI 2.0, HDCP 2.2, HDCP 1.4, DVI 1.0
HDMI resolution ............................ max. 4K with 60 Hz and YUV (4:4:4); 4K2K 50/60Hz 4:4:4;
4K2K 50/60Hz 4:2:0; 4K2K 30Hz 4:4:4; 1080p, 1080i,
720p, 720i, 480p, 480i; all HDMI 3D TV formats;
All PC screen resolutions including 1920 x 1200
Video bandwidth ........................... max. 18 Gbit/s (per display)
Colour space ................................ RGB, YCbCr4:4:4,YCbCr4:2:2, YCbCr 4:2:0
Colour depth ................................. 8-bit, 10-bit, 12-bit [1080p, 4K30Hz, 4K60Hz
(YCbCr 4:2:0)], 8-bit [4K60Hz (YCbCr 4:4:4)]
Supported functions ...................... HDR (HDR10, HDR10+, Dolby vision, HLG);
Arc (audio return channel); enhanced EDID management;
Integrated web interface (control via TCP/IP)
HDMI audio formats ...................... PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD,
DTS, DTS-EX, DTS-96/24, DTS High Res,
DTS-HD Master Audio, DSD
Coaxial audio formats ................... PCM2.0, Dolby Digital/Plus, DTS 2.0/5.1
L/R audio formats ......................... PCM2.0CH
Dimensions (W x H x D) ............... Approx. 221 x 44 x 113 mm (HDMI switch)
Weight .......................................... approx. 798 g (HDMI switch)
13.3 Remote control
Power supply ............................... 1 x 3 V button cell, type CR2025
Dimensions (W x H x D) ............... Approx. 52 x 12.5 x 124 mm (remote control)
Weight .......................................... approx. 37 g (remote control)
13.4 Power adapter
Input voltage/current ..................... 100 - 240 V/AC, 50/60 Hz, 0.8 A
Output voltage/current .................. 12 V/DC, 2.5 A
Output ........................................... 5.5 x 2.1 mm; screw connection
13.5 Ambient conditions
Operating conditions ..................... 0 to +40 °C, 20 to 90 % RH (non-condensing)
Storage conditions ........................ -20 to +60 °C, 20 to 90 % RH (non-condensing)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE. *2498159_V1_0422_02_m_RR_VTP_EN