Cleaning And Maintenance - TOOLCRAFT CL15-G Bedienungsanleitung

9 Cleaning and maintenance

This product does not require any user maintenance; never attempt to dismantle it (except for
inserting or replacing the batteries as described in these operating instructions). Servicing or
repair work may only be carried out by a specialist.
Turn off the product before cleaning, ensuring that the laser lines are switched off.
Do not use aggressive cleaning agents, as these can cause discolouration. To prevent scratch
marks, do not press too strongly on the surface when cleaning.
If the device is dusty, clean it with a brush before wiping it with a damp cloth.
10 Disposal
10.1 Product
Electronic devices are recyclable waste and must not be disposed of in household
waste. At the end of its service life, dispose of the product in accordance with the
applicable regulatory guidelines.
Remove any inserted batteries and dispose of them separately from the product.
10.2 Batteries
As the end user, you are required by law to return all used batteries (Battery Directive). They
must not be placed in household waste.
Batteries containing hazardous substances are labelled with these symbols to in-
dicate that disposal in household waste is forbidden. The abbreviations for heavy
metals in batteries are: Cd=Cadmium, Hg=Mercury, Pb=Lead (marked on batteries,
e.g., under the rubbish bin symbol shown to the left).
Used batteries can be returned to collection points in your municipality, our stores or any batte-
ry retailer. You thus fulfil your statutory obligations and contribute to environmental protection.
Before disposal, the exposed contacts of batteries must be fully covered with a piece of adhe-
sive tape to prevent short-circuits. Even if batteries are depleted, the remaining energy may
present a hazard in the event of a short-circuit (bursting, severe heating, fire, explosion).
11 Technical Data
Power Supply ............................... Battery: 3 x AAA, 1.5 V/DC
...................................................... (not included)
Operating time .............................. Approx. 4 hrs (depending on the batteries used)
Working range .............................. Up to approx. 12 m (depending on the ambient light)
Automatic levelling accuracy ........ ±0.5 mm/m
Self-levelling range ....................... ±4°
Automatic levelling time ................ <4 s
Laser class ................................... 2
Laser output power ....................... <1 mW
Laser wavelength ......................... 520 nm
Tripod ........................................... Tripod socket: 6.35 mm (1/4"), height max. 67 cm
Operating conditions ..................... 0 to 50 °C, <80 % RH (non-condensing),
...................................................... max. 4000 m N. N.
Storage conditions ........................ -10 to 70 °C, <80 % RH (non-condensing)
Dimensions (L x W x H) ................ 76 x 63 x 54 mm
Weight .......................................... 195 g (without batteries)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE. *2373340_V1_1221_02_VTP_m_EN