General Information - TOOLCRAFT CL15-G Bedienungsanleitung

Operating instructions
Cross-line laser „CL15-G" with tripod
Item No. 2373340
1 Intended use
This product is designed to create or check horizontal and vertical lines by means of the built-in
laser. It produces a horizontal and/or a vertical green laser line via the built-in optics. The hori-
zontal/vertical line is automatically aligned via the automatic levelling system. It is also possible
to switch off the automatic levelling system in order to use one or both of the laser lines for a
variety of other possible purposes. Power is supplied via three AAA batteries (not included).
For safety and approval purposes, do not rebuild and/or modify this product. Using the product
for purposes other than those described above may damage the product. Read the operating
instructions carefully and store them in a safe place. Only make this product available to third
parties together with its operating instructions.
The product complies with the statutory national and European requirements. All company and
product names contained herein are trademarks of their respective owners. All rights reserved.
2 Delivery content
Cross-line laser Laser warning signs in different languages
Tripod
Operating instructions
3 Latest product information
Download the latest product information at
shown. Follow the instructions on the website.
4 Symbols in this document
This symbol warns of hazards that can lead to personal injury. Read the information
carefully.
This symbol warns of a dangerous voltage which can lead to injuries due to electric
shock. Read the information carefully.
The arrow symbol indicates special information and advice on operation.
5 Safety information
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.

5.1 General information

The unauthorised conversion and/or modification of the product is prohibited for safety
and approval reasons. Do not dismantle the product, except for inserting or replacing the
batteries as described in this operating manual.
Maintenance and repair work must be done by a technician/specialist repair centre. The
product does not contain any components which require adjustment or servicing by you.
The product is not a toy and must be kept out of the reach of children. It contains small
parts, glass and batteries. Additionally, there are other hazards due to the laser (e.g. dama-
ge to the eyes). Use or store the product so that it is out of the reach of children.
The product must not be exposed to extreme temperatures, direct sunlight, intense vibra-
tion, high mechanical stress, or humidity. Handle the product with care. Jolts, impacts or a
fall even from a low height may damage the product.
The product must not be operated in explosive environments.
Do not leave packaging material lying around carelessly, as it could become a dangerous
plaything for children.
The product must be operated under the supervision of qualified personnel in schools,
educational facilities, hobby and DIY workshops.
For installations in industrial facilities, follow the accident prevention regulations for electri-
cal systems and equipment issued by the national safety organisation or the corresponding
national authority.
If you have any questions that are not answered in these operating instructions, please
contact our technical department or another specialist.
www.conrad.com/downloads or scan the QR code
5.2 Laser
The product is equipped with a class 2 laser. Laser signs in different languages are in-
cluded in the packaging. If the information on the cross-line laser is not written in your
language, please affix the appropriate sign on the product.
Max. Output: <1 mW
Wavelength: 520 nm
When operating the product, the laser must be directed in such a way that no person or animal
is located within the range of projection and that unwanted reflected rays (e.g. due to reflecting
surfaces/objects) are not within range of any person or animal.
Laser radiation can be dangerous if the laser beam or its reflection enters unprotected eyes.
Inform yourself about the legal regulations and safety measures for using such a laser device
in your country before you use the product and the laser.
Never look into the laser beam or point it at people or animals. Laser radiation can cause
serious eye damage.
Do not point the laser beam at mirrors or other reflective surfaces. The uncontrolled, reflected
beam may strike people or animals.
If laser radiation enters your eyes, close your eyes immediately and move your head away
from the beam.
Should your eyes feel irritated from laser radiation, do not perform any safety-related tasks
such as operating machinery or working at high altitudes or close to high-voltage components.
Do not drive any vehicles until the eye irritation has subsided.
In the event of prolonged eye irritation, consult a doctor.
Do not dismantle the product, except for inserting or replacing the batteries as described in
this operating manual.
Maintenance and repair work must be done by a technician/specialist repair centre. Improperly
executed maintenance, adjustments or repair work may result in dangerous laser radiation.
If you proceed in a different way or use any controls other than those specified in this manual,
you may expose yourself to hazardous radiation.
5.3 Operation
The product must not get damp or wet, as this could cause it to be damaged. For this rea-
son, do not use the product during precipitation, in humid environments or in/under water.
Only use the product in temperate climates. It is not suitable for use in tropical climates.
Refer to the „Technical data" section for information on the permitted ambient conditions.
Never use the product immediately after it has been brought from a cold room into a warm
one. This may generate condensation, which can cause the product to malfunction or da-
mage the interior components.
Allow the product to reach room temperature before using it.
Protect the product from dust and dirt.
Switch the product off when it is not in use.
If you do not plan to use the product for an extended period (e.g. storage), remove the
batteries. Old batteries may leak and damage the product! After removing the batteries,
keep the product in a clean and dry place out of the reach of children.
5.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the device.
If it is no longer possible to operate the product safely, stop using it and prevent unau-
thorised use. DO NOT attempt to repair the product yourself. Safe use can no longer be
guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stress.
5.5 (Rechargeable) batteries
Pay attention to correct polarity when inserting the batteries.
If you do not plan to use the product for an extended period, remove the batteries to prevent
damage from leaking. Leaking or damaged batteries may cause acid burns if they come
into contact with your skin. Always use suitable protective gloves when handling damaged
batteries.
LASER
2
EN 60825-1: 2014