Mounting And Operation - Bosch UniversalLeafBlower 18V-130 Originalbetriebsanleitung

Typically the A-weighted noise levels of the product are:
– Sound pressure level
– Uncertainty K
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 50636-2-100:2014
h
– Vibration emission value a
h
– Uncertainty K
That the declared vibration total value(s) and the declared
noise emission value(s) have been measured in accordance
with a standard test method and may be used for comparing
one machine with another.
That the declared vibration total value(s) and the declared
noise emission value(s) may also be used in a preliminary as-
sessment of exposure.
That the vibration and noise emissions during actual use of
the machine can differ from the declared total value depend-
ing on the ways in which the machine is used; and of the
need to identify safety measures to protect the operator that
are based on an estimation of exposure in the actual condi-
tions of use (taking account of all parts of the operating cycle
such as the times when the machine is switched off and
when it is running idle in addition to the trigger time).

Mounting and Operation

Caution: Switch garden tool off and remove battery
u
from machine before adjusting or cleaning.
The battery has a double locking system to provide for
u
additional security. Press the release button once to dis-
connect the battery from the power supply of the device,
but use the second locking mechanism for transporting
the machine in the garden without activating the ma-
chine.
The numbering of the product features refers to the illustra-
tion of the product on the graphics pages.
Action
Delivery scope
Troubleshooting
The following chart lists problem symptoms, possible causes and corrective action, if your machine does not operate properly.
If these do not identify and correct the problem, contact your service agent.
Warning: Switch off the machine prior to any troubleshooting.
Warning: In the event of an accident or tool breakage, stop the machine immediately and remove the battery.
Problem Possible Cause
Machine fails to oper- Battery discharged
ate
Battery not fully connected
Battery too hot/cold
Machine defective
Bosch Power Tools
dB(A)
dB
2
m/s
2
m/s
Action
Fitting the nozzle
Inserting/charging the battery
Adjusting the airflow velocity /
switching it on/off
Working Advice
Maintenance
Accessories
Symbols
The following symbols are important for reading and under-
standing the original instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the product in a better and safer
manner.
Symbol
Figure Page
A 159
Figure
Meaning
Movement direction
Starting
Starting
Stopping
Audible noise
Accessories
Corrective Measure
Recharge battery
Insert the battery correctly (see figure C)
Allow to cool/warm. Always start the product at a
low speed
Contact Service Agent.
F 016 L94 308 | (14.12.2022)
English | 11
3 600 HA0 600
80
= 3
< 2,5
= 1,5
Page
B 160
C 161
D 161
E 162
F 162
G 163