BOMANN VS 7345 Bedienungsanleitung, Garantie Seite 24

• If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Reversing the door opening
If required, the door opening can be moved from the
right (supplied condition) to the left side.
WARNING:
When replacing the door stop, the appliance must be
disconnected from the power supply first.
• Remove the hinge cover and the blind cap.
• Disassemble the upper door hinge and lift out the
appliance door.
• Relocate the door stopper unit (x) and, if neces-
sary, the rubber supporting pad (y) on the under-
NOTE:
• Ask another person to assist.
You possibly need:
•
driver as well as a thin-blade screwdriver.
*Delivery scope!
•
Keep the parts to be replaced for another possible
door stop change.
side of the door. Set the appliance door safely
aside.
• Tilt the appliance backwards slightly and block it
in this position. Unscrew the feet and disassemble
the lower door hinge.
24
screw wrench, Phillips screw-